Relay Module (12V–30A) – 1 Relay For Arduino (Code51654)
50.00EGP
متوفر في المخزون
الوصف
Description:
- 30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A;
- Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA;
- Module can be set high level or low level trigger by the jumper;
- Power indicator light (green), relay status indicator light (red);
- Module Size:50mm*33mm*24mm;
Technical parameters:
- Voltage version: 12V
- The static current: 5mA
- Working current: 190mA
- Trigger current: 2-4mA
Module interface specifications:
- DC+ : DC power supply positive pole
- DC- :DC power supply negative pole
- IN : signal triggering pin
- JD+ : relay control voltage positive
- JD- : relay control voltage negative
- DC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal
- High and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger
- Normally closed pin (NC) : relay normally closed pin
- Common pin (COM) : relay common pin
- Normally opened pin (NO) : relay normally opened pin
يسمح فقط للزبائن مسجلي الدخول الذين قاموا بشراء هذا المنتج ترك مراجعة.
المراجعات
لا توجد مراجعات بعد.