Selected:

LM4558 – Dual Operational Amplifier IC (Code51170)

4.00EGP

LM4558 – Dual Operational Amplifier IC (Code51170)

4.00EGP

متوفر في المخزون

Add to Wishlist
Add to Wishlist
رمز المنتج: 51170 التصنيف: الوسوم: , , , ,

الوصف

LM4558 is an IC consists of Two General Purpose Operational Amplifiers and is a member of ‘LMxx’ family. The LM series originated with integrated circuits made by National Semiconductor. The prefix LM stands for linear monolithic, referring to the analog components integrated onto a single piece of silicon. The chip is short circuit protected and the internal frequency compensation ensures stability without external components.

LM4558 Pin configuration

LM4558 is a 8 pin device as shown in above pin diagram and description for each pin is given below.

Pin

Name

 Description

1

1OUT

Output pin of the Op-amp 1

2

1IN-

Inverting input of Op-amp 1

3

1IN+

Non-Inverting input of Op-amp 1

4

GND

Ground

5

2IN+

Non-Inverting  input of Op-amp 2

6

2IN-

Inverting  input of Op-amp 2

7

2OUT

Output pin of the Op-amp 2

8

VCC

Power supply

The device is available in many packages the user can choose depending on requirement.

Features and Electrical characteristics of LM4558 IC

  • Two individually operated operational amplifiers
  • Low noise interference among op-amps
  • Continuous Short-Circuit Protection
  • No frequency Compensation Required
  • No latch-up
  • Large common mode and differential voltage range
  • Gain and phase match between amplifiers
  • Low noise input transistors
  • Moisture Sensitivity Level 3
  • Parameter tracking over temperature range
  • CMRR (Common-Mode Rejection Ratio): 80dB
  • Single Supply Operation: +5.0 V to +15 V
  • Dual  Supply Operation: +15V and -15V
  • Operating temperature: 0ºC to 70ºC
  • Total power dissipation: 200mW

LM4558 consists of two general purpose op-amps and its applications are based on them. The device can be used to realize general purpose op-amp operation circuits like comparator, differential amplification or mathematical operations. The high common-mode input voltage range and the absence of latch-up make these amplifiers ideal for voltage-follower applications. In addition with two of those op-amp on board the device can perform two different functions at a time which comes in handy in applications. 

How to use LM4558 IC

First let us consider the internal connection of two op-amps in the device as shown below.

LM4558 Internal Op amps

As mentioned earlier we can use these two op-amps to realize most of op-amp based circuits like comparator, differential amplification and mathematical operations. We will use op-amp to construct a simple comparator circuit to understanding the working of op-amp. Now let us take a single op-amp from the two and construct a simple application circuit as show below.

LM4558 Op amp Circuit

In the circuit a comparison between voltages V1 and V2 is done by the device and an output is provided as Vo. Also the device is powered from single voltage source of VCC.

In the circuit, Vid = V1 – V2

If Vid >0 then Vo = VCC

If Vid<0 then Vo = 0V or GND

Based on the state of the output we can determine whether Vid is positive or negative and also whether V1 is higher or V2 is higher at the input. With the higher voltage being know by knowing the output the function of op-amp as a comparator is done.

Applications

  • Mathematical operations
  • Amplifiers
  • Oscillators
  • Voltage comparators
  • Peak detectors
  • Logic voltage translation
  • Industrial
  • Measuring instruments

2D-Model

All dimensions are in inches [millimeter in brackets]

LM4558 IC Dimensions

 

Component Datasheet

 

المراجعات

لا توجد مراجعات بعد.

يسمح فقط للزبائن مسجلي الدخول الذين قاموا بشراء هذا المنتج ترك مراجعة.

Close Menu
×

Cart